To protect all extended warranties, the following precautions are required:

ENGINES - Cooling systems must be tested and flushed.  Cooling fans must be working properly.  Proper verification of normal service and maintenance every 4,000 miles must be maintained.  Servicing is recommended on external timing belts prior to installation because belt failure could result in extensive damage.  Heat tabs will be placed on every engine sold.

TRANSMISSIONS - All transmissions sold are drained and will need to be serviced with manufacturer recommended oil, filter, and front and rear seals.  Transmission cooling systems must be flushed.

AIR CONDITIONING COMPONENTS - On all a/c parts sold, the system must be flushed, have a new receiver dryer installed, and will need to have new refrigerant oil.  The system also needs to be vacuum tested before being charged with Freon.

HYDRAULIC PARTS - All Parts that are driven hydraulically or require hydraulics will need to have the old fluid flushed out and replaced with manufacturer's recommended fluid before the replacement part is installed.

AXLES - All carrier assemblies and axle assemblies are drained and must have the proper lubricant added when installed.

Warranty does not cover abuse or neglect.  All claims on extend warranty must be authorized by your salesperson prior to having repair done.  Failure to follow the above required procedures may result in voiding extended warranty.

____________________________________________________